Disposal of hydrocarbon condensate with LEWA process diaphragm pumps

Hydrocarbon condensate (HCC) is a waste product during the production of natural gas, offshore and onshore.

The disposal of HCC is difficult, because of its toxic, corrosive, abrasive and partially high boiling nature. With these contents, the material selection for the pumps requires particular competence.


Advantages of diaphragm pumps in offshore applications:

  • Absolutely resistant PTFE diaphragms
  • Safe sandwich diaphragm with monitoring
  • Hermetically tight, no leakage of toxic and environmentally polluting components
  • Fast and easy diaphragm replacement
  • No wetted piston sealing
  • Diaphragm pump body made of resistant solid material
  • Optimum valve layout using a modular system
  • Service life of over 10,000 hours is normal
  • Optimum lifetime with very low service costs

The stand-by pump can be started directly and remains switched on under suction or discharge pressure in the system.


Onshore disposal is really not a problem because of the storage options. Offshore, HCC is separated from gas and intermediately stored in what are called knock-out drums. Reinjection or transport runs to a central collection point for further pumping onshore and for processing at the knock-out drums.

The quantity in this process is variable; pressure and availability are important aspects: The pump must withdraw a sufficient volume to avoid triggering the LSHH of the knock-out drum, since otherwise production must be stopped. The mixing of corrosive and abrasive contents means the selection of wetted parts is highly important, especially for valves that need matching hardness and corrosion resistance.

Important points for a proper layout:

  • Design of the piping system
  • Sizing of the piping system
  • Filter data
  • Pressure drop and mesh size (filter surface, double filter with switch-over and differential pressure display/signal)
  • Shut-off valves with full area
  • Pulsation damper and their installation location
  • Position of the knock-out drum (over the pump, if possible, so that there is a feed)

In addition it includes the following substances:

  • H2S: corrosive and highly toxic
  • CO2: high vapor pressure, non-lubricating, freezes when decompressed
  • Mercury: highly toxic and water contaminating
  • Water, that is also separated from gas and combined with H2S is very corrosive
  • Diesel portions (low): not dangerous, other than possible water contamination
  • Water + H2SO4: acid, very corrosive
  • Sand portions in HCC (low): highly abrasive in the predominant operating pressures up to 250/300 bar

The various components of HCC are listed in the table:

HCC Formula Melting point °C Boiling point °C State at 25°C
Methane CH4 -183 -164 gaseous
Ethane C2H6 -183   -89 gaseous
Propane C3H9 -190   -42 gaseous
Butane C4H10 -138   -0.5 gaseous
Pentane C5H12 -130   +36 liquid
Hexane C6H14   -95   +69 liquid
Heptane C7H16   -91   +98 liquid
Octane C8H18   -57 +125 liquid
Nonane C9H20   -51 +151 liquid
Decane C10H22   -30 +174 liquid
Undecane C11H24   -25 +196 liquid
Dodecane C12H26   -10 +216 liquid
Eicosane C12H42  +37 +343 solid
Triacontane C30H62  +66 +450 solid


Pumps and Packages for the Production of Crude Oil and Natural Gas

LEWA has been your expert in pumps and packages since the 1950s. With us, you get everything from a single source: Our custom-built packages are used all around the world for offshore crude oil and natural gas production. From China to the United Arab Emirates, strong partners rely on our expertise for crude oil exploration applications.

More Details


LEWA ecoflow® diaphragm metering pump

LEWA ecoflow is the innovative and universal metering pump with DPS diaphragm protection system in a tried-and-tested modular system. Suitable for numerous applications, the ecoflow is our real all-around talent, relied on by customers from all industries.

More Details

LEWA ecoflow® process pumps for high-pressure applications

The innovative ecoflow diaphragm process pump shows its strengths in high-pressure applications in the oil and gas, refinery and petrochemical industries as well as in the sensitive areas of pharmaceuticals, biotechnology, food and beverage production.

More Details

LEWA triplex® process pumps for high-pressure processes

The LEWA triplex process diaphragm pump is among the world's most compact high-pressure pumps and can even be set up in the tightest spaces when space is at a premium. The power package has proven its strength in numerous high-pressure processes in a variety of industries. Oil and Gas icon Gas odor icon gray Refinery icon Petrochemicals icon Chemicals icon Plastics icon gray Cleaning icon Cosmetics icon Pharma icon Food icon Energy icon Other icon

More Details

Keep in touch with us

Get insights into our products and applications for liquid metering. You will also receive all the latest news about LEWA as well as invitations to our exclusive events.

LEWA is on LinkedinLEWA is on YouTubeLEWA is on Instagram
©2023 LEWA GmbH  Terms & Conditions Privacy Imprint